6
Installation
5
Ensure that no pressure is applied to the installation while mounting or
removing the sensor� Please note: Display „0%“ does not mean that the
system is free of pressure!
Horizontal mounting recommended for high medium temperatures�
To monitor a tank:
If possible, mount the sensor at
►
the bottom of the tank (1)� Do not
mount near an agitator (2), a pump
(3) or in the spout of the tank (3)�
�
�
�
Screw the sensor into a G 1 pro-
►
cess fitting�
Tighten the sensor with a spanner�
►
Tightening torque: 20 Nm��
��
�
�
�
�
A = freely rotatable housing
