Photoelectric distance sensor
OGD25x OGD55x
27
11.2.1.2 Parameter setting via IO-Link
u
Call up [Parameter] > [Output configuration].
u
Select the output configuration under [OU1] / [OU2].
11.2.2 Measured parameter
For each output, the measured parameter, i.e. distance or reflectivity, can be set.
•
[dist]: Distance
•
[rEFL]: Reflectivity
11.2.2.1 Parameter setting via the device keys
u
Select [SEL1] / [SEL2].
u
Confirm by clicking on [●].
w
Set parameter value is displayed.
u
Keep [▲] or [▼] pressed for at least 3 s.
u
Use [▲/▼] to select the measured parameter [diSt] (distance) / [rEFL] (reflectivity).
u
Confirm by clicking on [●].
u
The setting is confirmed.
11.2.2.2 Parameter setting via IO-Link
u
Call up [Parameter] > [Output configuration].
u
Select the measured parameter [Distance] / [Reflectivity] under [SEL1] / [SEL2].
11.2.3 Object teach for hysteresis function
The device offers the possibility to teach in [SP1] / [SP2] via an object teach. For this purpose, the
object to be detected must be placed in the sensor’s detection zone. When the teach-in process is
completed, the currently measured value is stored in [SP1] / [SP2].
11.2.3.1 Teaching via the device keys
u
Change to menu level 1.
u
Select [OU1] / [OU2].
u
Confirm by clicking on [●].
w
Set parameter value is displayed.
u
Keep [▲] or [▼] pressed for at least 3 s.
u
Use [▲/▼] to select the output configuration [Hno] or [Hnc].
u
Confirm by clicking on [●].
u
Select [SEL1] / [SEL2].
u
Confirm by clicking on [●].
u
Use [▲/▼] to select the measured parameter [diSt] (distance) / [rEFL] (reflectivity).
u
Confirm by clicking on [●].
u
Select [tSPx].
w
The parameter value for [SPx] is displayed.
u
Keep [▲] or [▼] pressed for at least 3 s.
