3D camera O3X1xx
22
Parameters of Device Config
Methods for parameter access are defined here:
Parameter name
Data type
Description
Name
String (utf8)
User-defined name of the device (max. 64 characters).
Description
String (utf8)
User-defined description of the device
(max. 500 characters).
SessionTimeout
Int
*has limits
Number of seconds which a session stays before a call
to "heartbeat" method is needed.
IPAddressConfig
Int
readonly: The ifm Vision Assistant requires to know
if the device is on a discovery IP address for multiple
use cases. This information was extended to reflect all
kinds of IP-address situations.
Allowed values:
0: Static (IP address explicitly defined inside the
device)
1: DHCP (using a DHCP server in the network)
2: LinkLocal (configured to DHCP, but no server which
provided an address)
3: Discovery (changed by IP4Discovery mechanism)
PasswordActivated
Bool
readonly: Is true if the password protection is enabled.
OperatingMode
Int
readonly: Mode of device (RUN, EDIT)
Always returns 0 ("run mode"). Parameter is present
for compatibility reasons.
DeviceType
String
readonly: Delivers a type description, unique by
imager, evaluation logic and device interface.
ArticleNumber
String
readonly: Official catalogue number.
ArticleStatus
String
readonly: Official two-letter status code.
UpTime
Double
readonly: Hours since last reboot.
ImageTimestampReference Int
Unit: seconds
readonly: The timestamp is the current system time
(UTC) in seconds since 1.1.1970.
TemperatureIllu
Double
Unit: celsius
readonly: Temperature measured in the device.
*has limits: parameters with this marker are listed in the reply of getAllParameterLimits method.