![background image](http://html1.mh-extra.com/html/ifm/o3m970/o3m970_brief-instructions_3903162010.webp)
Illumination unit
10
8 Set-up
8.1 Put the sensor into operation
To put the sensor into operation follow the instructions below�
1� Switch off the power supply�
2� Use MCI cable to connect sensor and illumination unit�
3� Connect sensor with Ethernet cable�
4� Connect the sensor with the sensor cable for CAN bus and power supply�
> The sensor cable connects the power supply and CAN with the sensor�
5� Connect illumination unit with power supply�
6� Connect CANfox USB interface with PC via USB and with CAN via adapter cable�
7� Establish power supply�
During the first set-up the sensor connects with the illumination unit�
Connection may take up to 60 s�
9 Approvals/standards
The EU Declaration of Conformity is available on our website:
www�ifm�com
10 Note on the software
This unit contains (maybe modified) Open Source software which is subject to
special licensing terms�
For copyright information and licensing terms please refer to:
www�ifm�com/int/GNU
For software subject to the GNU General Public License or the GNU Lesser
General Public License the source code can be requested against payment of the
copying and shipping costs�