17
UK
8.2 Explanation of the menu
For the factory settings please refer to the end of these instructions
8.2.1 Factory setting
Setting of the display unit
Selection of the unit of measurement for [SP1], [SP2], [ASP], [AEP]
Options: [cm] [m] [inch]
→ 10.3.1 Selection of the display unit
Free choice of the tank height
If the height of the tank is known, it can be entered without the unit being
mounted� The entered distance is used as reference level�
Distances between 20�0���999�5 cm can be selected�
→ 10.2.1 Free choice of the tank height
Carry out the basic teach empty state
The bottom of an empty tank can be set as reference level�
→ 10.2.2 Carry out the basic teach empty state
Adjustment to the reference level
The current level of a partly filled tank can be entered as numerical value�
Based on this data the future reference level is calculated�
→ 10.2.3 Carry out the adjustment to the reference level
8.2.2 Main menu
Configuration for output 1
4 switching functions can be selected:
[Hno], [Hnc], [Fno], [Fnc]
Switch point for window and hysteresis function OUT1
Hysteresis function
Upper limit value at which the output with selected hysteresis function
changes its switching status (medium nearer / farther than distance set)�
• [SP1] is the set point if [OU1] = [Hno]
• [SP1] is the reset point if [OU1] = [Hnc]�
→ 10.3.4 Setting of the switch points for hysteresis function OUT1
Window function
[SP1] is the upper limit value at which the output with selected window
function changes its switching status if [OU1] = [Fno] or [Fnc]�
→ 10.3.5 Setting of the switch points for window function OUT1
