IFM KQ10 Series, Руководство по эксплуатации

Страница: 12 / 35

12
5.6.3 Filling edge sharpness
Relates to the sharpness of the edge of the level in a value range from 0 to 100� If
no edge of the level could be detected, the substitute value "0xFF" is provided� A
low value can for example indicate an uneven filling edge�
High edge sharpness Low edge sharpness
2
1
2
1
2
1
Fig� 3: Representation of the edge sharpness
1: Tank wall
2: Medium
If the edge sharpness is too low, it may not be possible for the sensor to correctly
detect the level�
The edge sharpness can only be determined if the medium to be detected
is within the measuring range of the unit�
5.6.4 Installation quality
Relates to the installation quality in a value range of 0-100� If there is full
adjustment a value estimated by the unit is provided� A low value may for example
indicate metal parts that are too close to the sensing face of the sensor (→ 6
Installation) �
5.7 Internal temperature
The internal temperature of the unit can be read (→ 10.2.5) �
Minimum value and maximum value are cyclically stored in the memory of the
unit� The values can be used for orientation after a new start of the unit�