7. Der Lese-/Schreibkopf im ASi-Netzwerk
Grundeinstellung
Adressierung
Der Lese-/Schreibkopf wird adressiert mit einem Adressiergerät (z.B. AC1144), dem
Master oder mit der AS-i-Software des Hosts (die Komponenten müssen AS-i Versi-
on 2.1 unterstützen).
Vergeben Sie eine Adresse zwischen 1 und 31.
Analogwert-Repräsentation
Für das AS-Interface ist der Lese-/Schreibkopf ein Analogeingang-Slave mit Über-
tragungsprotokoll nach Profil 7.4. Arbeitet der Master gemäß Master-Profil M3
oder M4, erkennt er den Lese-/Schreibkopf automatisch und unterstützt das Profil
7.4.
Im Bereich der Analogwertübertragung sind die Profile 7.3 und 7.4 identisch.
Das Handbuch mit der ausführlichen Beschreibung der AS-i Dienste nach Profil 7.4
finden Sie im Internet unter:
➔
Datenblatt-Suche
➔
DTA100
➔
weitere Informationen
Belegung der Datenbits
In einem Übertragungszyklus werden folgende Daten in Datentripel übertragen:
Additional Information Bits:
O = Overflow-Bit (wird bei den Werten 7FFF und 8000 Hex. gesetzt, sonst 0)
V = Valid-Bit (wird bei einem gültigen Wert gesetzt)
www.ifm-electronic.com
RF
-
IDENTIFIKATIONSSYSTEM
DTA100
7
DEUTSCH
Parameter
Wert
I/O Code [hex]
7
ID Code [hex]
4
Extended ID2 Code [hex]
C
ID1 Code für Codewert [hex]
F
Slave-Adresse (Werkseinstellung)
0
E3 E2 E1
D1 6 D1 5 D1 4 D1 3 D1 2 D1 1
D1 0 D9 D8 D7 D6 D5 D4 D3 D2 D1
O
V
Extention
Bits
(statisch 0)
User Data Bits