27
UK
10.2 Explanation of the menu
10.2.1 Main menu
tREF
Carry out tank adjustment.
SP1 / rP1
Upper / lower limit value for the level at which OUT1 switches.
FH1 / FL1*
Upper / lower limit for the acceptable range (monitored by OUT1).
ASP2
Analogue start point for level: Measured value at which the analogue start
value is provided. The analogue start point is
set with parameter [ou2].
AEP2
Analogue end point for level: Measured value at which the analogue end
value is provided. The analogue end value is
set with parameter [ou2].
SP2 / rP2**
Upper / lower limit value for the level at which OUT2 switches.
FH2 / FL2*
Upper / lower limit for the acceptable range (monitored by OUT2).
EF
┘
Extended functions / opening of menu level 2.
* Menu point only visible when window function ([ou..] = [F..]) is selected.
** Menu point only visible when OUT2 = binary output ([ou2] = [H..] or [F..]) is selected.
10.2.2 EF level (extended functions)
rES
Restore the factory setting (all parameters incl. tank adjustment)
CFG
┘
Open the submenu CFG (configuration)
ENV
┘
Open the submenu ENV (environment parameter)
SIM
┘
Open the submenu SIM (simulation)
