1. Bestimmungsgemäße Verwendung
Das Prozess- und Dialoggerät PDM 360 compact ist ein programmierbares Grafik-
display zur Steuerung, Parametrierung und Bedienung von mobilen Maschinen
und Anlagen.
Die Kommunikation mit anderen Systemkomponenten, wie z.B. dezentrale I/O-
Module, erfolgt über eine CAN-Schnittstelle mit dem CANopen Protokoll.
Die Ethernet- und RS-232 Schnittstelle sowie die Ein-/Ausgänge (nur CR1056) bil-
den eine universelle Plattform für die Vernetzung und Kommunikation mit ande-
ren Geräten.
Das Prozess- und Dialoggerät PDM 360 compact ist nicht für sicherheitsrele-
vante Aufgaben im Sinne des Personenschutzes zugelassen.
Eigenschaften im Überblick
• 3,8" (320 x 240 Pixel) Display
• 3 hinterleuchtete, frei programmiergbare Funktionstasten
• 1 Drehgeber mit Drucktaster
• Geschlossenes Metallgehäuse (IP 67) für die Ein- und Aufbaumontage im
Außen- oder Kabinenbereich
• Frei programmierbar nach IEC 61131-3 mit Target-Visualisierung
• 32-Bit-Controller und Embedded Linux Betriebssystem
• CAN-Schnittstelle mit CANopen Protokoll
• Ethernet- und RS-232 Schnittstelle
PROZESS
-
UND DIALOGGERÄT
PDM 360
COMPACT
SEITE
4
¹
)
Downloadbereich mit Anmeldung