E2M231 / E2M232 monitor for analogue cameras
14
6.3.7 Camera switch
The behaviour of the [Camera switch] key is set in the [Camera
switch] menu (→ „4.1 Camera switch“):
●
[OFF]: Setting for 1 connected camera without video switcher .
The [Camera switch] key is deactivated .
●
[3C]: Setting for 3 connected cameras with video switcher .
●
[2C]: Setting for 2 connected cameras with E2M232 or video
switcher .
●
[4C]: Setting for 4 connected cameras with E2M232 and video
switcher .
The ifm video switcher is available as accessory with the article number E2M235:
www .ifm .com
6.3.8 Tacho settings
In the [Tacho settings] menu the external control of the cameras is
set:
●
[AUX wire function]: Set the mode of the wires . The following
modes are available:
– [OFF]: Deactivate the wires .
– [TCH]: Control the cameras via a tachometer . Connect the
grey wire to the tachometer and the yellow wire to the parking
brake .
– [KEY]: Deactivate the keyboard with the grey wire .
– [C-+]: Select the connected cameras with the wires .
●
[Pulses per meter]: Set the speed pulses per metre (resolution)
in the [TCH] mode .
●
[Cam to activate]: Set the camera to be activated in the [TCH]
mode .
●
[Cam on if speed >=]: Set the speed in km/h as from which the
camera is to be active in the [TCH] mode .
●
[ . . and speed <]: Set the speed in km/h up to which the
camera is to be active in the [TCH] mode .
Wiring and more details about the wires are indicated in the supplied installation instructions
(→ Installation instructions, chapter 6.2 "Wiring").
