E2M231 / E2M232 monitor for analogue cameras
10
6 Service menu
The [Service menu] contains extended device settings .
+
+
Press the [Camera selection] [Minus / -] and
[Plus / + ] keys simultaneously to activate the
service menu .
The settings are divided:
● [Camera settings] (→ „6.1 Camera settings“)
● [Camera tags] (→ „6.2 Camera name“)
● [System settings] (→ „6.3 System settings“)
● [Info] (→ „6.4 Info“)
6.1 Camera settings
The connected cameras are set in the [Camera settings] menu .
The following settings are available:
[C1] / [C2] / [C3]: The camera settings are made separately
for each connected camera .
●
[Mirror]: Mirror the screen on the horizontal axis .
●
[Upside down]: Mirror the screen on the vertical axis .
●
[Brightness]: Set the brightness of the display .
●
[Contrast]: Set the contrast of the display .
●
[Saturation]: Set the colour saturation of the display .
●
[Switch delay]: Activate the switching delay . This setting is
required if the wire is to be controlled with an uninterrupted
signal (e .g . from an indicator) .
●
[Hor . marker]: Activate or deactivate horizontal marking line .
●
[Marker pos .]: Set position of the horizontal marking line . With
default setting the marking line is in the middle of the screen
(50) .
●
[Vert . marker]: Activate or deactivate vertical marking line .
●
[Marker pos .]: Set position of the vertical marking line . With
default setting the marking line is in the middle of the screen
(50) .
●
[Graticule]: Activate or deactivate the point grid .
●
[Cinema mode]: Scale the camera signal to the screen area .
With scaling, the camera signal distances may be more
difficult to estimate .
6.2 Camera name
In the [Camera tags] menu the name of the connected cameras is
changed . Max . 6 alphanumerical characters are available for the
name .
