background image

DV2900 DV2910 DV2920 DV2930

20-LED light tower

16

Activated

Deactivated (factory setting)

This parameter is only available in Signal Light Mode.

9.2.9 Segment colors. Segment x

Colour definition for all LEDs in this segment

Off

Red (factory setting for segment 1)

Green (factory setting for segment 3)

Orange (factory setting for segment 2)

Blue (factory setting for segment 5)

Violet

Turquoise

White (factory setting for segment 4)

User-specific configuration: see parameters Select user color (

Ò

 

/

 15)

This parameter is only available in Signal Light Mode.

9.2.10 Segment appearance. Segment x

Setting of the flashing frequency for this segment

Permanently on (factory setting for segment 1...5)

Flashing slow

Flashing medium

Flashing fast

Blinking slow

Blinking medium

Blinking fast

This parameter is only available in Signal Light Mode.

9.2.11 Size of segment. Segment x

Number of LEDs for this LED segment

A maximum of 20 LEDs can be divided into a maximum of 5 LED segments. If a total of 20 LEDs is
assigned, no further segment can be configured.

0…20

Factory setting for segment 1...5: 4

This parameter is only available in Signal Light Mode.

9.2.12 Direction of flow

Setting of the direction of movement for increasing input value with exceeded thresholds

Содержание DV2900




















Отзывы: