manualshive.com logo in svg

IFM DTI424, Руководство по эксплуатации

Поделиться
Скачать
IFM DTI424 Скачать руководство пользователя страница 7

DTI424 DTI425

7

5 Function

5.1 ID tags

The 

ID tags

 are passively operated without a battery. The energy required for operation is provided by

the read/write head.

The energy is provided via an inductive coupling. The integrated antenna coil in the read/write head
generates a magnetic field which partly penetrates the antenna coil of the ID tag. A voltage is
generated by induction that supplies the data carrier with energy.

The device supports ID tags according to ISO 15693.

5.2 Device overview

DTI424

Article number:

DTI424

Function:

Read/write head

Type designation:

DTRHF GBRWIOUS03

Type:

M18, flush mountable

DTI425

Article number:

DTI425

Function:

Read/write head

Type designation:

DTRHF GNRWIOUS03

Type:

M18, non flush mountable

5.3 IO-Link

This unit has an IO-Link communication interface which enables direct access to process and
diagnostic data. In addition it is possible to set the parameters of the unit while it is in operation.
Operation of the unit via the IO-Link interface requires an IO-Link master.

With a PC, suitable IO-Link software and an IO-Link adapter cable, communication is possible while
the system is not in operation.

The 

IODD

 required to configure the unit is available at 

www.ifm.com

.

Содержание DTI424
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды