IFM DTE801, Руководство по эксплуатации

Страница: 23 / 27

23
UK
9 Maintenance, repair and disposal
If used correctly, no maintenance and repair measures are necessary�
► The device must only be repaired by the manufacturer�
► After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations�
► Keep the device free from soiling�
► Use glass cleaner as cleaning agent�
► Do not open the device�
10 Approvals/standards
If approval is granted, the approval texts of the respective countries apply
(→ 10 Approvals/standards).
Information about the approvals granted:
www�ifm�com
10.1 Radio approvals
10.1.1 Overview
The overview of the approval status of a device is available on our website at
www�ifm�com�
10.1.2 Europe / EU declaration of conformity
ifm electronic gmbh hereby declares that the DTE80x/DTE90x radio system
corresponds to the directive 2014/53/EU�
You can find the EU declaration of conformity at the following Internet address:
www�ifm�com
10.1.3 USA
FCC note:
This device complies with Part 15 of the FCC Rules� Operation is subject to the
following three conditions:
1� This device must not cause harmful interference, and
2� this device must accept any interference received, including interference that
may cause undesired operation�
3� The distance between the read/write head and an ID tag must be > 20 cm�
Changes or modifications made to this equipment not expressly approved by ifm
may void the FCC authorisation to operate this equipment�