IFM DTE601, Руководство по эксплуатации, Страница: 18 / 21

DTE601 DTE602 DTE604 DTE605 RFID compact unit
18
LED red LED green State Note
off on Normal operation Connection to the EtherNet/IP scanner is
established. The device is configured. The
data transfer is running.
flashes off Minor error A connection to the EtherNet/IP scanner
was not established:
u
Verify voltage supply.
u
Check the configuration of the unit.
on off Major error Software / hardware error of the device:
u Reboot the device.
w
If the error remains, send the device
for service.
flashes flashes Self-test Starting phase of the device.
LED Net (network status)
LED red LED green State Note
off off No IP address or no voltage supply u Verify voltage supply.
u If DHCP is activated, check the
accessibility of the DHCP server.
off flashes No connection The device has received an IP address.
An EtherNet/IP connection was not estab-
lished.
u Check the configuration of the device
via EtherNet/IP scanner.
off on Connection exists At least one EtherNet/IP connection to the
device was established.
flashes off Timeout of the connection A timeout was found with one of the exist-
ing EtherNet/IP connections.
u
Check the status of the connection in
the EtherNet/IP scanner.
on off The IP address already exists The same IP address as that of the device
was detected in the EtherNet/IP network.
u
Activate DHCP.
flashes flashes Self-test Starting phase of the device.
8.3 Display elements DTE604 / DTE605
The following tables only apply to the DTE604 / DTE605 devices.
LED SF
LED red LED green State Note
off off No voltage supply Verify voltage supply.
off on Normal operation -
flashes off Error at channel level • Overload
• Temperature
• Internal error
on off Error at device level • Undervoltage
• Temperature
flashes flashes Self-test Starting phase of the device.
LED BF
LED red LED green State Note
off off No voltage supply Check the voltage supply