44
8.2.4 ST A / output characteristics
ifm electronic gmbh ● Friedrichstraße 1 ● 45128 Essen
We reserve the right to make technical alterations without prior notice!
19/06/2019
CR711S / page 8
CR711S
ST A / output characteristics
Control systems
ST A:
OUT0006...0007
OUT0106...0107
OUT0206...0207
Switching current
0�025���4 A
Protective circuit for inductive
loads
integrated
Accuracy current feedback
1% FS
Diagnostics current feedback
confi gurable minimum and maximum values
to detect short circuit and wire break
Diagnostics status feedback
detection of short circuit to VBB and short
circuit to GND according to programming
manual
Digital / PWM outputs
4.0 A, H-bridge
(OUT PWM-40-BRIDGE-A)
Digital output (B
H
)
Switching voltage
8���32 V DC
Range diagnostics min�/max�
0 A / 4 A (default)
Digital output (B
L
)
Functions
as H-bridge
PWM output (PWM
H
)
Output frequency
20���2000 Hz (per channel)
Pulse/pause ratio
1���1000 ‰ (adjustable via software)
Resolution
1 ‰ (at 20���250 Hz)
Range diagnostics min�/max�
0 A / 4 A (default)
PWM output (PWM
L
)
Output frequency
20���500 Hz (per channel)
Pulse/pause ratio
1���1000 ‰ (adjustable via software)
Resolution
1 ‰ (at 20���250 Hz)
Current-controlled output (PWM
I
)
Output frequency
20���2000 Hz (per channel)
Control range
0�05���4 A
Setting resolution
1 mA
Control resolution
2 mA
Load resistance
≥ 3 Ω (at 12 V DC)
≥ 6 Ω (at 24 V DC)
Accuracy
± 1�5 % FS (for inductive loads)
Range diagnostics min�/max�
0 A / 4 A (default)
ST A:
OUT0008
OUT0108
OUT0208
Switching voltage
8���32 V DC
Switching current
0�025���4 A
Protective circuit for inductive
loads
integrated
Accuracy current feedback
1 %
Diagnostics current feedback
confi gurable minimum and maximum values
to detect short circuit and wire break
Diagnostics status feedback
detection of short circuit to VBB and short
circuit to GND
Digital / PWM outputs 4.0 A
(OUT PWM-40-A)
Digital output (B
H
)
Range diagnostics min�/max�
0 A / 4 A (default)
