Installation instructions CANremote CR3114
14
7 Set-up
7.1 Necessary components
The following components are needed to configure and set up the device:
7.1.1 Hardware
● CANremote CR3114
Ensure that all components necessary for the device configuration are used (→
Remote configuration of the device is not possible�
● GSM and GPS antenna (e�g� GSM/GPS combined antenna, art� no�: EC2116)
● Valid SIM card
● PC
● CAN/PC interface (e�g� CAN/RS232 USB interface CANfox, art� no�: EC2112)
and adapter cable for CANfox (art� no�: EC2113)
● CAN bus terminating resistors (2 x 120 Ω)
7.1.2 Software
Device configuration
● ifm maintenance tool as from version V02�02�13
● CANremote AddIn for ifm maintenance tool
Device integration into the application program
● Programming system CODESYS V2�3
● CANremote CODESYS client/gateway (optional)
● Function libraries for remote maintenance and diagnostic functions (optional)
● Electronic data sheet (EDS) (optional)
● ServiceTool (optional)
● CANremote Licence ZC00xx (optional)
7.1.3 Documentation
● Programming manual CODESYS V2�3
(alternatively as online help)
● System manual of the controller used
(alternatively as online help)
The manuals are available on the internet as PDF files by entering the
corresponding article number:
www.ifm.com → Data sheet search → Article number → More information
Software, function libraries and manuals (as online help):
www.ifm.com → Service → Download → Systems for mobile machines*
*) Download area with registration
