IFM CR3020, Инструкция к добавке, Страница: 6 / 55

6
ifm Programming Manual (supplement) CAN module RTC CR3020 2017-10-26
System description Information about the device
2 System description
Information about the device ................................................................................................................. 6
Overview of functions ............................................................................................................................ 6
Hardware description............................................................................................................................. 7
Interface description .............................................................................................................................. 8
Software description .............................................................................................................................. 9
975
>
2.1 Information about the device
21798
This manual describes of the ecomatmobile family for mobile machines of ifm electronic gmbh :

Real-time clock (RTC) CR3020
>
2.2 Overview of functions
21808
Only ONE real-time clock may be installed in each project!
The real-time clock (RTC) offers the following functions:

Initialisation of the real-time clock,
Adjustment of the CAN baud rate to the controller

Setting of time and date:
Calendar day, month, year, hour, minute day of the week

Setting of date for the alarm output:
days, hours minutes (max. 7 days, 23 hours, 59 minutes)

Requesting current time and current date:
calendar day, month, year, hour, minute, day of the week, battery charging status

Requesting the remaining time till the set alarm:
days, hours, minutes
The real-time clock can be configured and consulted in various ways:

in conjunction with a controller from ifm-ecomatmobile
this is what POUs in a CODESYS library are there for
→ chapter
Functional elements from ifm
(
→ p.
12 )

in conjunction with a controller that is not from ifm
for this CAN messages via COB-ID and node ID are used
→ chapter
CAN messages via COB-ID and node ID
(
→ p.
9 )