22
ifm
Operating Instructions IO-Link Master with PROFINET interface DataLine 4 Ports IP 65 / IP 66 / IP 67 / IP 69K (AL1301)
05 / 2018
Configuration
LR DEVICE
>
8.1
LR DEVICE
Remarks .................................................................................................................................................23
IoT: Configure access rights ...................................................................................................................24
IoT: Configure IP settings .......................................................................................................................25
IoT: Configure the interface to the LR SMARTOBSERVER ..................................................................26
Fieldbus: Configure the PROFINET port ................................................................................................26
IO-Link ports: Activate data transfer to the LR SMARTOBSERVER .....................................................26
IO-Link ports: Configure operating mode ...............................................................................................28
IO-Link ports: Set the device validation and data storage ......................................................................29
Firmware: Reset device to factory settings ............................................................................................30
Firmware: Reboot the device..................................................................................................................30
Configure IO-Link devices ......................................................................................................................31
22822
On delivery, the AL1301 is configured with the factory settings (
→
Factory settings
(
Required software: LR DEVICE (1.3.1.x or higher) (art.-no.: QA0011/QA0012)