IFM AC6000, Руководство по эксплуатации

Страница: 21 / 94

IO-Link Master with AS-Interface Interface StandardLine 4 Ports IP 65 / IP 66 / IP 67
21
>
9.1 Notes
Content
Device structure ......................................................................................................................................21
Options for parameter setting .................................................................................................................21
Using the command interface .................................................................................................................22
51968
>
9.1.1 Device structure
59306
IO-Link Device
IO-Link Device
IO-Link Device
AS-i Master
IO-Link Device
AC600n
1
2
1
The AS-i slave component of the AC6000 sets the following features:
• Address range of the AC6000 in the AS-i network (max. 5 related AS-i addresses)
• Type and scope of the process data transferred between the AS-i master and IO-Link ports
2
The IO-Link component of the AC6000 includes the IO-Link master as well as the IO-Link ports.
>
9.1.2 Options for parameter setting
59307
The AS-i slave of the AC6000 is configured via functions of the AS-i master. This includes the
following settings:
• Addressing the AS-i slave
•
Setting the gateway profile (= setting the ID1 code of the basic AS-i slave)
To set the parameters of the IO-Link master and the IO-Link ports of the AC6000 and the connected
IO-Link devices, the access to process and diagnostic data as well as maintenance functions, the
following options are available:
• Command interface ( →
Using the command interface
( → p. 22 )
• Function library for CODESYS ( → programming manual)