SmartPLC DataLine with EtherCAT slave interface
113
>
7.4.1
OSC: View current error messages
41726
The [Current] tab lists all current messages. The messages are in chronological order. All messages
regarding warnings and errors are displayd.
Information about the different types of messages:
→
Message types
(
Overview of possible OSC messages of the device:
→
OSC messages
(
To view the error messages that are currently active:
1 Select the menu page
►
On the start screen: Select [OSC]
►
Select [Current] tab.
2 Show current messages
>
The page shows the error messages that are currently active.
►
Press [
] to select the message field.
>
The focus (orange frame) is on the message field.
►
Use [
]/[
] to go through the error messages.
3 Optional: filter messages
►
Set the following parameters as required:
Parameter
Description
Possible values
[Filter]
System component the
message was created in
[All]
Display all messages in chronological order of their
occurrence (= preset).
[AS-i 1]
Display messages that were created in AS-i master
1.
[AS-i 2]
Display messages that were created in AS-i master
2 (only selectable for devices with 2 AS-i masters).
[System]
Display messages that were created in the system.
>
Page shows filtered messages.
