AS-i Gateway with Profinet device interface
52
>
5.4.3
AS-i 1 / AS-i 2: AS-i slaves
41539
The [AS-i Slaves] menu provides access to information and configuration options of the AS-i slaves.
The scope of configuration options shown ([Data] and [Setup] tab) varies according to the
status of the selected AS-i slaves.
>
Display the input/output data of the AS-i slave
41438
To display the input/output data or the parameter output of the selected AS-i slaves:
1 Select the menu page
►
>
or
>
►
Select an AS-i slave (→
Slave selector
(→ S.
►
Select [Data] tab.
2 Display input/output data
>
Depending on the profile of the selected AS-i slave, the page displays the following data:
>
Digital input
41464
Name
Description
Example / Possible values
[Inputs]
Current values of the digital inputs
(binary and hexadecimal
representation)
Data bit is switched off (0 / OFF)
Data bit is switched on (1 / ON)
>
Analogue input
41528
Name
Description
Example / Possible values
[Inputs]
Current values of the analogue input
channels and information about their
status
[Valid]
The Valid bit indicates whether the
displayed value is valid.
Invalid value
Valid value
[Overflow]
The Overflow bit indicates whether the
displayed value is within the value range.
Value within valid value range
Valid value range exceeded
