IFM AC1401, Руководство по эксплуатации устройства

Страница: 115 / 175

AS-i Gateway with Profinet device interface
115
>
8.4 Configuration interface: connection concepts
Content
Direct link ..............................................................................................................................................115
Connection via Ethernet network .........................................................................................................116
41594
To be able to access the web interface and the programming interface of the device-internal PLC, the
configuration interface (X3) must be connected to a computer. The device supports the following
connection types:

Direct connection (
→
Direct link
(
→ S.
115 ))

Connection via an EtherNet network (
→ Connection via Ethernet network
(
→ S.
116 ))
>
8.4.1 Direct link
41458
To establish a direct connection to the device:
► Connect configuration interface X3 of the device with the Ethernet interface of the PC/laptop.
►
Setup the IP parameters of the configuration interface according to the requirements (→ Address assignment
in Ethernet networks (→ S. 114 )).
> User can access the web interface and/or programming interface of the device.