■
■
Setting of the switch points
Switch point 1 (SP1) = lower value, setting range: LED 0 ... SP2
Switch point 2 (SP2) = upper value, setting range: SP1 ... LED 9
30
*Decrease the switch point: Let the flashing and lit LEDs move to the
maximum setting value. Then the cycle starts again at the minimum setting
value.
-
SP1
: min. setting value = LED 0; max. setting value = LED “SP2”.
-
SP2
: min. setting value = LED “SP1”; max. setting value = LED 9.
**Overflow: If the flashing LED and the lit LED exceed the maximum setting
value, the cycle starts again at the minimum setting value.
1
2
Press the
Mode/Enter
button.
The current switch point is
indicated:
LED lit: coarse setting, LED
flashes: fine setting.
Press the
Learn/Set
button and
keep it pressed
After 5 s the switch point is
increased* (incremental by
pressing briefly or scrolling by
holding pressed).
Indication:
The flashing LED moves from left
to right. After LED 9 has been
reached the cycle starts again at
LED 0. The LED which is constantly
lit moves on by one position.**
LO
HI
LO
HI
LO
HI
1 time (= setting of SP1)
2 times (= setting of SP2)
M
S
M
S
3
Press the
Mode/Enter
button
briefly (acknowledgement).
The set switch point becomes
effective; the unit passes into the
operating mode.
HI
LO
M
S
>5s
