IFM Electronic O3M151 Скачать руководство пользователя страница 23

Страница: 23 / 62

O3M151 3D Smart Sensor Object Detection

Parameter

Description

Inactive time after triggering

Time-based hysteresis for 2 successive triggerings:

Depending on the strength of the braking deceleration, several successive indi-

vidual triggerings may occur during the course of an overall braking procedure�

These are part of the overall triggering process�

5.3.6 Operational extension by the ifm controller

A pre-defined application for the O3M Smart Sensor is available with the CR0403 ifm CAN controller in com-

bination with the CR0451 basic display� The reception and interpretation of the sensor signals, and also the

I/O handling are implemented in the controller� The user can perform the parameterisation at the basic display,

supported by a graphic interface�
The ifm controller package contains the following functionalities:

●

Up to 3 sensors can be connected to a CAN bus (reception, interpretation of the outputs and monitor-

ing the sensor availability and status)�

●

The results are shown on the basic display in a clear format�

●

A PWM output is available to activate an acoustic warning signal, which is modulated according to the

criticality of the situation (→ see diagram below).

● The monitoring can be set to recognise 3 different steps of criticality (→ see diagram below):

– Zone-based collision warning: Division of the monitoring area into 3 monitoring areas

– Intelligent collision prediction: Division into 3 time zones up to the anticipated collision
Warning signals and risk of collision reactions can be configured individually for the individual monitor-

ing areas or time zones�

●

The position and the size of the monitoring areas, together with the warning signals and collision reac-

tions can be set and changed on site at the basic display without any other tools�

Various application examples for the ifm controller package are available on a CODESYS basis� These can

be downloaded from www.ifm.com → Service → Download → Industrial Image Editing (O3M15X - librar

ies)�

Содержание O3M151































































Результаты поиска

Содержание O3M151

Отзывы:

Бренды по названию

Популярные бренды

IFM Electronic O3M151, Руководство по программированию

Результаты поиска

Содержание O3M151

Отзывы:

Бренды по названию

Популярные бренды