1
2
3
4
5
On
Out/OK
Tea
ch
3
1
2
To
lerance
Out
Run
Delay
Run
After a successful teach-in operation the
function display (Out/OK) comes on. If it
flashes, the intensity is too high. Incline
the sensor by 10 ... 30° and repeat the
teach-in operation.
If the function display is not lit, the inten-
sity is too low. Select a lighter mark.
Only for retro-reflective mode
If the function display flashes, increase the
distance sensor/object or sensor/reflector
or use a smaller reflector.
If the function display is not lit, reduce the
distance sensor/object or sensor/reflector
or use a larger reflector.
Set the programming selector switch to
Run or Run Delay (20 ms switch-off delay).
For sensors with several switching outputs
repeat the programming for the other
switching outputs accordingly.
The colour tolerance can be individually
determined for each switching output.
The sensor is ready for operation.
If the switching output is activated, the
function display is lit (Out/OK).
If the tolerance setting is to be changed
subsequently, programming must be
made again with the tolerance setting
changed.
1
2
3
4
5
On
Out/OK
Tea
ch
3
1
2
To
lerance
Out
Run
Delay
Run
4
5
7