17
UK
2
Setting of the parameter value
► Press [Set] and keep it pressed�
> Current setting value of the param-
eter flashes for 5 s�
> After 5 s: setting value is changed:
incrementally by pressing the button
once or continuously by keeping the
button pressed�
Numerical values are incremented continuously� For reducing the value: let the dis-
play move to the maximum setting value� Then the cycle starts again at the minimum
setting value�
3
Acknowledgement of the parameter
value
► Press [Mode/Enter] briefly�
> The parameter is displayed again�
The new setting value is stored�
Setting of other parameters
► Start again with step 1�
Finishing the parameter setting
► Press [Mode/Enter] several times until the current measured value is displayed or wait
for 15 s (from menu level 1) or 30 s (from menu level 2)�
> The unit returns to the operating mode�
• If [S�Loc] is displayed when an attempt is made to modify a parameter value,
either an IO-Link communication is active (temporary locking) or the sensor
is permanently locked via software� This locking can only be removed via a
parameter setting software�
• Change from menu level 1 to menu level 2:
► Press [Mode/Enter] until [EF] is
displayed�
► Press [Set] briefly�
> The first parameter of the submenu is
displayed (here: [HI])�
• Locking/unlocking:
The unit can be locked electronically to prevent unintentional settings�
