IFM Electronic efector300 SD5000, Руководство по эксплуатации

Страница: 4 / 27

4
1 Preliminary note
1.1 Symbols used
► Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
→
Cross-reference
Important note
Non-compliance can result in malfunction or interference�
Information
Supplementary note�
2 Safety instructions
• Please read this document prior to set-up of the unit� Ensure that the product is
suitable for your application without any restrictions�
• Work on compressed air systems as well as mounting, setting for operation
and set-up of the unit must be carried out by qualified personnel� When doing
so, state of the art as well as safety and accident prevention regulations have
to be adhered to�
• Ensure before mounting the components into or removing them from the
compressed air system that the installation is at a standstill and no pressure is
applied�
• Improper or non-intended use may lead to malfunctions of the unit or to un-
wanted effects in your application� That is why installation, electrical connec-
tion, set-up, operation and maintenance of the unit must only be carried out by
qualified personnel authorised by the machine operator�
• Check the compatibility of the product materials (→ 11 Technical data and scale
drawing) with the media to be measured in all applications�
• In order to guarantee the correct condition of the device for the operating time it
is necessary to use the device only for media to which the wetted materials are
sufficiently resistant (→ Technical data).
• The responsibility whether the measurement devices are suitable for the
respective application lies with the operator� The manufacturer assumes no