IFM Electronic efector 300 SU8001, Руководство по эксплуатации

Страница: 25 / 31

25
US
► Press [Set] once� The flashing digit is increased� 9 is followed by 0 - 1 - 2, etc�
8 1� 2 3
1 x [Set] pressed 9 1� 2 3
1 x [Set] pressed 0 1� 2 3
1 x [Set] pressed 1 1� 2 3
► Press [Set] and
keep it pressed�
The flashing digit is increased, 9 is followed by 0 and the digit
following on the left becomes active�
8 1� 8 3
[Set] permanently pressed 8 1� 9 3
[Set] kept pressed 8 1� 0 3
If digit 1 is increased this way, the display changes to the next
higher setting range (9 is followed by 10, the decimal point is
moved one place to the right or the LED display changes)�
8 1� 2 3
[Set] permanently pressed 9 1� 2 3
[Set] kept pressed 1 0 1� 2
► Wait 3 s (do not
press any button)�
The digit following on the right flashes (= becomes active)�
8 1 2� 3
no pushbutton pressed; after 3 s 8 1 2� 3
after 3 s 8 1 2� 3
after 3 s 8 1 2� 3
If the fourth digit flashes unchanged for 3 s, digit 1 becomes ac-
tive again (if the value of digit 1 is > 0)�
after 3 s 8 1 2� 3
If digit 1 has the value “0”, the display changes to the next lower
setting range (the decimal point is moved one place to the left or
the LED display changes)�
0 1 2� 3
after 3 s 1 2� 3 0
Next: Change digit 4 or wait 3 s and set digit 1�
after 3 s 1 2� 3 0
Highlighted grey ( 1 ) = flashing digit�
Note: If [Set] is pressed continuously, the display moves through all setting ranges; after the
end value it jumps back to the start value� Release [Set] briefly and start the setting again�