Manage configuration data
The reader can store up to 32 configuration data files. These files can be managed in
the represented dialogue page. The stored configuration data files are indicated in
the list and are clearly marked by the list numbers.
In the
Main Tasks
menu item the following possibilities for a configuration data file
are available via the corresponding buttons:
•
Create
a new configuration data file:
Select a free location and activate the
button. A dialogue will open
into which you can enter the name of the new configuration data file. Then con-
tinue to the
dialogue page (page 37).
•
Activate
an existing configuration data file:
With this button you determine the selected configuration data file as active set-
ting. After you have switched on the reader, the Data Matrix codes are automati-
cally read using the settings from the activated configuration data file.
•
Edit
an existing configuration data file:
The selected configuration data file can be changed. Continue to the
dialogue page (page 37) and you can change the individual
settings of the configuration data file interactively step by step.
Set basic parameters
Set basic parameters
Create new
35
ENGLISH
File location no.
(list of configuration
data files)
Activated file
location
Port information
Reader information
Name of activated
data file
