C
ABINET
C
ONTROLLER
CR0302
PAGE
12
3. Mounting
The controller is to be mounted in a dry and enclosed environment (e.g. control
panel of the driver's cab, separate control boxes etc.).
It is mounted with 4 screws M4 x L.
4. Electrical connection
To protect the whole system (wiring and controller) the individual electric circuits
must be protected.
5. Maintenance, repair and disposal
As the Controller does not contain any components which must be maintained
by the user, the housing must not be opened. The maintenance of the controller
may only be carried out by the manufacturer. The disposal must be carried out
according to the corresponding national environmental regulations.
6. Approvals/standards
Test standards and provisions
➔
Technical data.
The CE Declaration of Conformity and the E1 approval are available at:
➔
Data sheet direct
➔
CR0302
➔
Approvals
www.ifm.com
Designation
Potential
Connector : Pin no.
Fuse
supply voltage
U
B
X1:01
max. 2 A T
supply voltage digital outputs
U
COM01/02
X3:05/10
max. 16 A
U
COM03
X5:02
