IFM Electronic E30430, Руководство по эксплуатации

Страница: 8 / 10

8
9 Parameter setting
9.1 Parameter setting in general
1. Change from the RUN mode to the main menu [●]
2. Select the requested parameter
[ ▲ ] or [ ▼ ]
3. Change to the setting mode [●]
4. Modification of the parameter value [▲] or [▼] > 1 s
5. Acknowledge the set parameter value [●]
6. Return to the RUN mode > 30 s (timeout) or press [
▲
] and
[ ▼ ] simultaneously until the RUN
mode is reached.
10 Troubleshooting
Display Description Type Instructions
1 ERROR Faulty units /
malfunction
Error ► Replace device
2 (off) Supply voltage too
low
Error ► Assure a voltage supply with a
sufficiently available current.
(18 … 30 V DC)
3 PARA Parameter setting
outside the valid
range.
Error 1. Save the parameter settings.
2. Restore the factory settings.
3. Enter parameters again.
PARA
invalid device
catalogue,
try catalogue
update
Device catalogue no longer up to
date.
► Reinstall device catalogue