IFM Electronic AL1122, Руководство по эксплуатации

Страница: 76 / 111

76
ifm Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 8 Ports IP 65 / IP 67 (AL1122) 2017-05-31
Appendix
>
Output assembly
9214
Byte Content
0 Digital output data of the IO-Link ports in the DO operating mode (
→
Mapping: Digital output data (DO)
(
→ p.
76 ))
1 reserved
2 reserved
3 reserved
4...45 Acyclic command area: Request channel (
→ Request channel
(
→ p.
78 ))
46 Port X01: Acyclic output data (n bytes)
46+n Port X02: Acyclic output data (n bytes)
46+2n Port X03: Acyclic output data (n bytes)
46+3n Port X04: Acyclic output data (n bytes)
46+4n Port X05: Acyclic output data (n bytes)
46+5n Port X06: Acyclic output data (n bytes)
46+6n Port X07: Acyclic output data (n bytes)
46+7n Port X08: Acyclic output data (n bytes)
Legend:
n = [2,4,8,16,32]; is determined by the parameter [Prozess_Data_Length] (
→ Process data length
(
→ p.
69 ))
>
Mapping: Digital output data (DO)
19841
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
X08: Pin 4 X07: Pin 4 X06: Pin4 X05: Pin 4 X04: Pin 4 X03: Pin 4 X02: Pin 4 X01: Pin 4
Legend:
X0n: Pin 4 Signal level on pin 4 of the
IO-Link port 1 bit 0x0 = OFF
0x1 = ON