3
UK
1 Preliminary note
1.1 Notes on this document
This document applies to devices of the type "AS-i controller
e
" (art� no�: AC1391 /
AC1392)� It is part of the device and contains information about the correct
handling of the product�
This document is intended for qualified electricians� These specialists are people
who are qualified by their training and their experience to see and to avoid
possible hazards that may be caused during operation of the device�
► Read this document before using the device�
► Keep this document during the service life of the device�
1.2 Symbols used
►
Instructions
>
Reaction, result
[…] Designation of pushbuttons, buttons or indications
→
Cross-reference
Important note
Non-compliance can result in malfunction or interference�
Information
Supplementary note
2 Safety instructions
2.1 General
► Observe these operating instructions�
► Adhere to the warning notes on the product�
Non-observance of the instructions, operation which is not in accordance with use
as prescribed below, wrong installation or incorrect handling can affect the safety
of operators and machinery�
2.2 Installation and connection
The device must only be installed, connected and put into operation by a qualified
electrician as the safe function of the device and machinery is only guaranteed
when installation is correctly carried out�The installation and connection must
comply with the applicable national and international standards� Responsibility lies
with the person installing the device�
