
IFLIGHT
STABILIZED GIMBAL SYSTEMS USER GUIDE
Copyright © 2015
IFLIGHT MODEL
. All rights reserved.
VI
.
OPERATING POSITIONS
The
IFLIGHT G
40 Lite
can operate in many positions, allowing you to get shots from down low and up high or even mount the gimbal to a
tripod or crane. These operating positions can be changed very quickly by cycling the gimbals power. The gimbal can operate in all five of
the program modes while in any of these operating positions.
Under-Slung Mode
This is the most commonly used mode with the handles up on top and the camera down below. When the gimbal is resting in the tuning stand, it is in the
Under-Slung mode.
o
Simply power on the gimbal from the tuning stand, or while in your hands, to begin using the gimbal in the Under-Slung Position.
Inverted Mode
Use this mode when you want to get the camera to sit comfortably at an elevated level. You can also hold the gimbal up high to get shots from above.
o
To get the gimbal into the Inverted Position, long press the mode button,then the motors are off,flipping the gimbal upside-down,then press 5
times the mode button,the gimbal start in the inverted mode.To get back to the normal position(under-slung position),long press the mode
button to turn the motors off,then flip the gimbal to normal postion,press 5 times the mode button,now it's back to Uder-Slung Position
o
Invert the rubber grip handles 180 degrees.
Briefcase Mode
Use this Position to get shots down low. In this position, you will be holding the gimbal at your side with one hand on the rubber side handle.
o
To get the gimbal into the Briefcase Position, start by holding the gimbal in your hands in the Under-Slung position with the gimbal motors
are powered off.