IFBR1C
4
Preset Selection
Press the
PRESET
button to access the Preset page. Presets are displayed
as:
P on the left and the current preset number (1-10) on the right
OR
If the current preset slot is empty, an E also appears on the right. Use the
UP
and
DOWN
arrow buttons to navigate among any programmed presets, tuning
the receiver to each.
NOTE: If the preset number is blinking, the receiver IS NOT currently
tuned to that preset. It also indicates that the “escaped mode” is active
and any preset (even empty slots) may be selected via arrows.
In order to program presets, you must first get into “escaped mode.” Press
and hold the
PRESET
button until the letter P blinks. Once in escaped mode,
there are two options available for setting presets:
Choosing the preset slot first:
1. Press
PRESET
to display the preset page.
2. Use
UP
and
DOWN
to choose the desired slot. When navigating among
the preset slots in this way, all slots are accessible, even the empty ones,
and the receiver’s tuning is not affected.
3. If the desired preset slot is occupied, you can reprogram by pressing
DOWN
to clear the slot.
4. Press
FREQ
to display the frequency, then use the
UP
and
DOWN
arrow
buttons to adjust the frequency in 1 Mhz steps.
5. Press
PRESET
again to return to the preset page. You should see the slot
you chose.
6. Press and hold
UP
to store the preset. The E (if any) will dis-
appear and the preset number will stop blinking, indicating that this slot
has now been programmed.
Choosing the frequency first:
1. Press
FREQ
to display the frequency, then use the
UP
and
DOWN
arrow
buttons to adjust the frequency in 25 kHz steps.
2. Press
PRESET
to display the preset page.
3. Press and hold
PRESET
until the P blinks (escaped mode). When navigat-
ing among the preset slots in this way, all slots are accessible, even the
empty ones, and the receiver’s tuning is not affected. Choose the preset
slot.
4. Press and hold
PRESET
+
UP
to program the preset. The E will disappear
and the preset number will stop blinking, indicating that this slot has now
been programmed with the current frequency.
Programming Presets
