1. Normal wash programmes A to F
STAGE 1 : Pre-Wash - A
q
Clothes are soaked, tumbled in hot water with detergent to remove dirt and
dirty water is pumped out.
q
IN CASE CLOTHES ARE NOT HEAVILY SOILED, THE “PRE-WASH” CAN BE
AVOIDED BY SETTING THE PROGRAMME SELECTOR KNOB TO ANY OF
THE MAIN WASH PROGRAMMES.
STAGE II: Main Wash - B/C/D
q
Clothes are soaked, tumbled in hot water with detergent for longer duration
than prewash to remove dirt. During draining dirty water it is cooled down
by adding cold water. Clothes are tumbled to expose more surface,
squeezed by spinning to remove dirt inside the fabric.
q
IF CLOTHES ARE NOT VERY DIRTY, THE MAIN WASH CAN BE STARTED
BY DIRECTLY SETTING THE PROGRAMME SELECTOR KNOB AT POINTS
C OR D TO REDUCE WASHING TIME.
STAGE III: Rinse
q
After washing, the rinsing is done three times to remove traces of detergent
and dirt from clothes.
For improving efficiency of rinsing two intermittent short spins at lower
rpm are provided.
STAGE IV: Spin Drying - F
q
Spin drying takes place at 600 rpm and then goes to 800 rpm.
q
If spin cancel button is pressed, there will be no spin
q
If spin speed selector button is pressed, spinning takes place at 600 rpm
2. Easy Care Programme G to L
STAGE I : Pre - Wash : G
q
Clothes are soaked, tumbled in more quantity of hot water with detergent to
remove dirt and dirty water is pumped out.
q
IN CASE CLOTHES ARE NOT HEAVILY SOILED, THE “PRE- WASH” CAN
BE AVOIDED BY SETTING THE PROGRAMME SELECTOR KNOB TO
ANY OF THE MAIN WASH PROGRAMMES.
10
Содержание Executive Plus
Страница 26: ...25...