iFan IF404, Инструкция по эксплуатации

Страница: 9 / 15

e.
To turn ON : Press the Speed Button to the fan speed (Low – ‘1 / 2 / 3’ – High)
you desire.
f.
Tilt the Fan Head or Grille upwards or downwards to the desired position to
adjust the angle of the fan.
g.
Pushing down the Swing Button on the Fan Head will make the fan oscillate
side to side, sweeping an arc across the room. To stop the fan from oscillating,
pull up the Swing Button on the Fan Head.
h.
To turn OFF : Press the Speed Button to the fan speed ‘0’.
i.
Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:

cover the appliance during functioning;
 insert objects or body parts (including clothing and hair) inside the protection
cover of the appliance to avoid personal injury or damage to the machine when
the appliance is in operation;

attempt to force the fan blades to turn;

touch the inside of the fan while it is operating. The blades are rotating at very
high speeds, which may lead to injury to your fingers and hands;
 press the Speed Buttons too forcefully;
 use the appliance near curtains or textiles;
 use any of the following agents as a cleaner: gasoline, thinners, or benzene;
 operate the appliance for more than 6 hours without turning it off for at least 30
minutes to let the appliance cool down for a total usage of 12 hours a day –
failure to heed this warning may result in motor failure;
 leave the appliance unsupervised during operation.
17.
During operation, DO NOT touch the appliance with wet body parts, and it is
recommended to have between you and the standing surface, an isolating element
(for example, wearing shoes with rubber soles).
18.
DO NOT soak the Motor Unit in water or other liquids, wash it under the tap, or let
any liquid flow into the internal casing of the appliance to prevent electric shock.
In case of accidental fall in water, DO NOT try to take it out, but first switch the
appliance off.
19.
Plug and unplug the power cable firmly holding it with dry hands. Always unplug
the power cable to avoid overheating and avoid stretching it (DO NOT pull it, tug
it or use it to drag the appliance to which is connected). Before unplugging the
appliance, press the Speed Button to the fan speed ‘0’ and switch the wall socket
off.
20.
Switch the appliance off and unplug the power cable of the appliance if it is NOT
used for a long period, before storing, assembling & disassembling, cleaning or
performing any maintenance operation. Before storing, cleaning or performing any
maintenance operation, leave to cool for at least 30 minutes.