iFan IF404, Инструкция по эксплуатации

Страница: 12 / 15

HOW TO CLEAN s
1.
Switch the appliance OFF. Wait for the appliance to cool down completely.
2.
To disassemble
a.
Unlock the Grille Ring Clip and detach the Front Grille.
b.
Holding the Fan Blade, turn the Blade Cap clockwise .
c.
Slide the Fan Blade out of the Motor Shaft.
d.
Turn the Guard Mounting Nut anti-clockwise .
e.
Remove the Back Grille.
3.
Clean the exterior parts of the fan thoroughly with warm water & dishwashing
agent and a damp cloth, and immediately wipe dry.
DO NOT use any of the following agents as a cleaner: gasoline, thinners, or
benzene.
4.
Never run water over the appliance as malfunctions may occur if water seeps
inside the appliance.
5.
Use a vacuum cleaner to suck up dirt from the Air Inlet and Air Outlet.
6.
To assemble
a.
Insert the Back Grille through the Motor Shaft and tighten the Guard
Mounting Nut by turning clockwise .
b.
Slide the Fan Blade through the Motor Shaft. Wiggle the Wedge Groove at
the back of the Fan Blade onto the Space Pin of the Motor Shaft.
c.
Tighten the Blade Cap anti-clockwise .
d.
Ensuring the logo at the front of the Front Grille is positioned properly, attach
the Front Grille to the Back Grille and secure them by turning the screw of
the Grille Clip at the bottom of the Grille Ring.