IET Labs DE-5000, Руководство пользователя и обслуживания

Страница: 32 / 52

- 24 -
2.5.3. Sorting components
The DE-5000 can sort components into PASS/FAIL
categories. Components may be sorted based on
resistance, capacitance, or inductance.
Note : this function is not available in Auto LCR
mode. Before using this function, set the meter
to either Auto L mode, Auto C mode, or Auto R
mode.
To enter the Sorting mode, proceed as follows:
1. Zero the meter. Refer to pages 14-16 for details.
2. Press LCR AUTO to cycle through measurement
options until the desired impedance type is
selected.
Note
: If you select
Auto LCR
, the sorting function
will not work.
3. Connect one of the items that is going to be
measured to the test points.
4. Press
SORTING
, then press
SETUP
.
Note : If you press the SORTING key while the
meter is reading outside limits (OL) or while the
reading is less than 200 counts, the Sorting function
is disabled.