090010285 -
TECHNICAL MANUAL
-
IE 326S-2L
7
DISPOSAL INSTRUCTIONS
FOREWORD
FOR THE INSTALLER:
Please follow carefully the specifications relative to electric and security systems realization further to the
manufacturer’s prescriptions indicated in the manual provided.
Provide the user the necessary indication for use and system’s limitations, specifying that there exist pre-
cise specifications and different safety performances levels that should be proportioned to the user needs.
Have the user view the directions indicated in this document.
FOR THE USER:
Periodically check carefully the system functionality making sure all enabling and disabling operations
were made correctly.
Have skilled personnel make the periodic system’s maintenance. Contact the installer to verify correct sy-
stem operation in case its conditions have changed (e.g.: variations in the areas to protect due to exten-
sion, change of the access modes, etc…)
......................................................
This device has been projected, assembled and tested with the maximum care, adopting control procedu-
res in accordance with the laws in force. The full correspondence to the functional characteristics is given
exclusively when it is used for the purpose it was projected for, which is as follows:
Conventional smoke detector
Any use outside of this area is not provided and it is not possible to guarantee its proper operation, and
therefore it is expressly forbidden to the holder of this manual to use it for other reasons than those
indicated.
The manufacturing process is carefully controlled to prevent defects and malfunctions; nevertheless the
components used is subjected to faults extremely low percentage, as indeed it does for every other
electronic or mechanical.
Given the target of this article (property and persons protection) invite the user to proportion the
protection level offered by the system to the actual risk (considering the possibility that the system it is
operating in degraded mode due to faults or other), reminding that there are clear rules for the design and
construction of equipment to this type of application.
The system's operator is hereby advised to see regularly to the periodic maintenance of the system, at
least in accordance with the provisions of current legislation, as well as to carry out checks on the correct
running of said system on as regular a basis as the risk involved requires, with particular reference to the
control unit, sensors, sounders, dialler(s) and any other device connected. The user must let the installer
know how well the system seems to be operating, based on the results of periodic checks, without delay.
Design, installation and servicing of systems which include this product, should be made by skilled staff
with the necessary knowledge to operate in safe conditions in order to prevent accidents. These systems'
installation must be made in accordance with the laws in force. Some equipment's inner parts are connect-
ed to electric main and therefore electrocution may occur if servicing was made before switching off the
main and emergency power. Some products incorporate rechargeable or non rechargeable batteries as
emergency power supply. Their wrong connection may damage the product, properties and the operator's
safety (burst and fire).
According to
Directive 2012/19/EU
on the Waste of Electric and Electronic Equipment (WEEE),
it is here specified that this Electrical-Electromechanic Device started to be commercialized after
13th August 2005, and it shall be disposed of separately from ordinary waste products.
