Ier N0C902A Скачать руководство пользователя

Страница: 4 / 60

IER 560 COMBO PRINTER
User Guide

Page 4
N0C902A Rev. 2
Sept. 14, 2010

Ce document est la propriété d’IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.

This document is the property of IER and may not be reproduced or communicated

without prior written authorization

NORWAY:

This product is also designed for IT power distribution system with

phase-to-phase voltage 230V.

NORWAY

– SWEDEN – FINLAND:

Apparaten skall anslutas till jordat uttag när

den ansluts till ett nätverk.

WARNING

THIS APPLIANCE MUST BE GROUNDED.

THIS PRODUCT MUST EXCLUSIVELY BE CONNECTED TO AN
ELECTRICAL CIRCUIT THAT IS:



PROVIDED

WITH

GROUND

FAULT

CIRCUIT

INTERRUPTER (GFCI) COMPLYING WITH IEC 364 AND
NFC15-100 REGULATIONS, AND



CONFORMING WITH THE VOLTAGE CHARACTERISTICS
SPECIFIED BY THE NF EN 50160 STANDARD.

The cover(s), door(s) and/or drawer(s) of this product is (are) intended for occasional use
and must be normally closed.

The information and specifications contained in this document are subject to change

without prior notice.

Translated from French - IER Documentation Department

This document contains proprietary information of IER. It may not be reproduced or

communicated without prior written authorization of IER. It is intended solely for the use

of the product described herein, to the exclusion of any other usage.

It is provided as is, for information purposes only, without any warranty of any kind,

including any warranty of fitness or a particular purpose, and may be modified by IER at

any time.

The warranty shall be null and void in case of use of any spare part, special tool or consumable not

expressly approved in writing by IER and in the event of attempted repair or servicing of the

machines by persons lacking the requisite technical qualifications.

Содержание N0C902A





























































Результаты поиска

Содержание N0C902A

Отзывы:

Похожие инструкции для N0C902A

Бренды по названию

Популярные бренды

Ier N0C902A, Руководство пользователя

Результаты поиска

Содержание N0C902A

Отзывы:

Похожие инструкции для N0C902A

Бренды по названию

Популярные бренды