IEMCA BOSS 552 - IC, Руководство по эксплуатации и техническому обслуживанию

Страница: 18 / 187

2 - TECHNICAL INFORMATION BOSS 552-IC
EN
2 - Pag. 3 / 28
• MAIN PARTS
A MAGAZINE; it stores the bars.
B BAR SELECTION DEVICE; it enables the
first bar to be lowered into the guide
channels and holds the remaining bars
in the magazine.
C GUIDE CHANNELS; they guide the bars
during machining.
D BAR PUSHER; it pushes the bar during
machining.
E FEED CHAIN; transmits the motion from
the motor drive to the bar pusher.
F DRIVE SYSTEM; it moves the bar
pusher.
G FEEDING- REMOVAL DRIVE; it drives
the bar feeder parts that control bar
feeding into the collet and subsequent
bar remnant removal. It also drives the
bar feeder parts that control guide
channel opening/closing and bar
selection.
H CLAMPS; they hold the bar during
loading and removal from the collet of
the bar pusher.
L FACING DEVICE; it sends a signal when
the bar passes.
M REMNANT RECOVERY BOX; bar
remnants are dropped into this box
after removal from the bar pusher
collet.
N LUBRICATION PUMP; it delivers oil to
the guide channels.
P OIL RECOVERY DEVICE; it collects oil
flowing out of the guide channels.
Q HANDHELD KEYBOARD; it allows bar
feeder programming and function
activation.
R ELECTRIC CABINET; it houses the
electrical control panel.
S LATHE
T GUIDE CHANNEL OPENING SHAFT
V ENCODER
R
V
S
L
Q
C
T
A
H
B
D
E
F
G
A
N
M
P
R
V
S
L
Q
C
T
A
H
B
D
E
F
G
A
N
M
P