Measuring blood pressure and pulse
27
EN
a pulse, the icon
♥
appears. The reading is taken
as the air is let out. The blood pressure monitor
confirms the end of the measuring with a short
acoustic signal.
Note
Do not talk during the measurement.
You can stop the measurement at any time by
pressing the
button.
Note
To record the pulse wave, the Tel-O-Graph
®
BT
plus inflates the cuff to the diastolic blood
pressure for approximately 10 seconds after
measuring the blood pressure.
After the measurement, all the air is let out of the
blood pressure cuff. The display shows your blood
pressure and your pulse rate.
4) Remove the blood pressure cuff.
WARNING
Taking measurements too frequently can result
in disruptions to blood flow!
Wait for at least 2 or 3 minutes to give your
arteries time to return to their initial state.
6.5
Stopping the measurement
1) If the measurement causes you pain, press the
button during the measurement.
The air is let out of the blood pressure cuff and
the measurement is cancelled.
2) Remove the blood pressure cuff.
Содержание Tel-O-Graph BT plus
Страница 1: ...Operating manual EN Tel O Graph BT plus ...
Страница 51: ...Rev A 18 12 2018 ...