IEI Technology WSB-Q354 Скачать руководство пользователя страница 189

Страница: 189 / 205

WSB-Q354 PICMG 1.0 CPU Card

Page 174

F.1 Introduction

The Intel® ICH9R chipset can provide data protection for serial ATA (SATA) disks via the

Intel® Matrix Storage Manager using one of three fault-tolerant RAID levels: RAID 1, 5 or

10. When using two hard drives, matrix RAID allows RAID 0 and RAID 1 functions to be

combined, where critical files can be stored on RAID 1, and RAID 0 can be used for

non-critical items such as software. RAID 5 and RAID 0 can be combined to provide

higher performance, capacity, and fault tolerance.

CAUTION!

A configured RAID volume (which may consist of multiple hard drives) appears

to an operating system as a contingent storage space. The operating system

will not be able to distinguish the physical disk drives contained in a RAID

configuration.

F.1.1 Precautions

One key benefit a RAID configuration brings is that a single hard drive can fail within a

RAID array without damaging data. With RAID1 array, a failed drive can be replaced and

the RAID configuration restored.

WARNING!

Irrecoverable data loss occurs if a working drive is removed when trying to

remove a failed drive. It is strongly recommended to mark the physical

connections of all SATA disk drives. Drive locations can be identified by

attaching stickers to the drive bays. If a drive member of a RAID array should

fail, the failed drive can then be correctly identified.

CAUTION!

Содержание WSB-Q354














































































































































































































Результаты поиска

Содержание WSB-Q354

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology WSB-Q354, Руководство пользователя

Результаты поиска

Содержание WSB-Q354

Отзывы:

Бренды по названию

Популярные бренды