IEI Technology WAFER-PV-D5252, Руководство пользователя

Страница: 59 / 142

WAFER-PV-D5252/D4252/N4552 SBC
Page 46
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
ƒ
Enter the correct CMOS setting
ƒ
Load Optimal Defaults
ƒ
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in Table 4-3.
Pin Description
1-2 Keep CMOS Setup (Default)
2-3 Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings
Figure 4-4: Clear CMOS Jumper Location
4.5.3 LVDS Voltage Selection
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-5
Selects the voltage of the LVDS connector.