IEI Technology WAFER-6820, Руководство пользователя

Страница: 29 / 61

25
4
AWARD BIOS Setup
The WAFER-6820 uses the AWARD PCI/ISA BIOS for system
configuration. The AWARD BIOS setup program is designed to provide
maximum flexibility in configuring the system by offering various options,
which may be selected for end-user requirements. This chapter is written to
assist you in the proper usage of these features.
4.1 Introduction
This chapter discusses the Setup program built into the BIOS. The Setup
program allows users to configure the system. This configuration is then
stored in battery-backed CMOS RAM so that it retains the Setup
information while the power is off.
4.2 Starting Setup
The BIOS is immediately active when you turn on the computer. While the
BIOS is in control, the Setup program can be activated in one of two ways:
1. By pressing <Del> immediately after switching the system on, or
2. By pressing the <Del> key when the following message appears briefly
at the bottom of the screen during the POST (Power On Self-Test).
Press DEL to enter SETUP.