36
Note: If your IDE HDD was formatted in previous
older system, incorrect parameters may be detected.
In this case, you need to enter the correct parameters
manually or low-level format the disk.
4.7
Change Supervisor Password
This option sets a password that is used to protect
your system and Setup Utility. Supervisor Password
has higher priority than User Password. Once you
setup the password, the system will always ask you to
key-in password every time you enter the BIOS
SETUP. If you enter the BIOS SETUP with Supervisor
Password, you can choose every setup/option on the
main menu but with User Password, you can only
choose three setup/options (USER PASSWORD, SAVE
SETTING AND EXIT and EXIT WITHOUT SAVING). To
disable these passwords, enter the BIOS SETUP room
with Supervisor Password and then just press the
<Enter> key instead of entering a new password
when the 'Enter Password' prompt pop-up.
Note : if you forget the password, do the Clear/Reset
CMOS procedure (see Part2.3 the CPU Setting for
WAFER-4823 >> Clear CMOS SETUP)
