34
4.5
Peripheral Setup
When you enter the Peripheral Setup, the following
items are available for setting:
On-board IDE
Î
to define the on-board Integrated
Drive Electronics controller channel(s) to be used.
Available options are: Primary, Secondary and
Disabled.
On-board FDC
Î
The floppy disk drive controller can
be Enabled or Disabled by this item. When you do
not need floppy disk, the FDD controller can be
disabled. If you set it Auto, the BIOS will try to
enable any floppy drive controller on the ISA Bus.
Serial Port 1
Î
The options are Disable, 3F8, 2F8,
3E8, 2E8 and Auto. You can set the I/O address of
the serial port 1 ( COMA) or disable it.
