29
•
Serial Port 1: The options are Disable, 3F8, 2F8, 3E8, 2E8 and Auto. You can
set the I/O address of the serial port 1 or disable it.
•
Serial Port 2: The options are Disable, 3F8, 2F8, 3E8, 2E8 and
Auto. You can set the I/O address of the serial port 2 or disable it.
•
Serial Port 3: The options are Disable, 3F8, 2F8, 3E8, 2E8 and Auto. You can
set the I/O address of the serial port 3 or disable it.
•
Serial Port 4: The options are Disable, 3F8, 2F8, 3E8, 2E8 and Auto. You can
set the I/O address of the serial port 4 or disable it.
•
OnBoard Parallel Port: The options are Auto, Disable, 3BC, 378 or 278. You
can set the I/O address of the parallel port or disable it.
•
IrDA Protocol: To specify the function mode if an IrDA mode is selected.
•
Parallel Port Mode: WAFER-4821 provides EPP, ECP, ECP/EPP, and SPP/BPP
Mode. EPP passes the parallel port to be used with devices which stick to the
EPP specification. The existing parallel port signals will be used by EPP to
provide asymmetric bi-directional data transfer driven by the host devices. ECP
passes the parallel port to be used with devices which stick to the ECP
specification.
•
Parallel Port IRQ: To define the Interrupt Request (IRQ), which is used by the
parallel port.
•
Parallel Port DMA Channel: To set the DMA Channel used by the parallel
port.
